Thermo Scientific Forma Steri-Cult CO2 Incubator (Model 3311)

£3,995.00
In stock
SKU
N234

Thermo Scientific Forma Steri-Cult CO2 Incubator (Model 3311)

 
Note we have four of these (all identical) from the same previous owner together with the bracketry for stacking (as per image) and two roller platforms
 
Each Incubator with 4 shelves
 
Carry out high-volume culturing with a high-level of contamination control with these stackable Thermo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.
Direct Heat Chamber
The high capacity chamber are designed to provide maximum culturing space for high throughput applications
Standard right hand door swing
Polished stainless steel interior with coved corners is designed to be easy-to-clean
Active airflow gently distributes air throughout the chamber ensuring homogeneous conditions
Gentle airflow circulation is designed to reduce the risk of cross contamination
Sturdy stainless steel shelves and supports can be removed without tools for easy cleaning or adjustment
IR (Infrared) CO2 sensor provides precise monitoring and is unaffected by changes in rH setpoint
Active Humidity Control
Humidity level is easily adjustable with no water pan to manage
External water reservoir is designed to minimize chamber contamination and allows refilling without opening chamber
At-a-glance water level indicator helps prevent sample desiccation
                                                                                                     
140°C Sterilization Cycle
On-demand 140°C overnight (14 hours) sterilization cycle is independently validated
Simplifies cleaning and eliminates the need for separate autoclaving and reassembly of components
Designed to effectively eliminate bacteria, mold, yeast, and mycoplasmas from internal surfaces
ISO Class 5 HEPA Filtration Airflow System
In-chamber HEPA air filtration continuously filters entire chamber volume every 60 seconds
Reaches ISO Class 5 air quality in 5 minutes after door opening
Continuous protection minimizes contaminants settling on interior surfaces
Enviro-Scan Microprocessor Control
Easy-to-use, alphanumeric LED display
Flexible, intuitive controls with message center including process and alarm status messages
Configurable audible on/off, access code, tracking low and high alarms
Description Single 323L incubator
Certifications/Compliance UL, cUL, CE
CO2 Concentration Range 0 to 20%
CO2 Sensor Technology IR sensor
Data Outputs Optional 4-20mA
Capacity (Metric) 322.8 L
Chamber Material Polished Stainless Steel
Temperature Range (Metric) Ambient +5° to 50°C
Relative Humidity 95%, controllable
Electrical Requirements 230 V, 50/60 Hz
Humidity Source External humidity reservoir
Oxygen Control Not Available
 
Weight (English) 410 lb.
Dimensions (D x W x H) Interior 20.6 x 28.8 x 32.8 in. (52.3 x 73.2 x 83.8 cm)
Dimensions (L x W x H) 27 x 43 x 39.4 in. (68.6 x 109.2 x 100.2 cm)
 
Serial No: 314958-493
                          -494
               315047-495
                          -496
 
PDF Manual
More Information
SKU N234
Availability In Stock
Condition Used
Shipping £45.00
Write Your Own Review
You're reviewing:Thermo Scientific Forma Steri-Cult CO2 Incubator (Model 3311)
Copyright © 2013-2017 Magento, Inc. All rights reserved.